Weldnex Equipments India
Faridabad, Haryana
GST No. 06FYYPD3772H1ZV
TrustSEAL Verified
Call 08043848670 89% Response Rate
SEND EMAIL
A CNC (Computer Numerical Control) plasma cutting machine is a type of cutting tool that uses a high-velocity jet of ionized gas (plasma) to cut through various metals, such as steel, aluminum, and copper. The machine is controlled by a computer program that directs the cutting path and intensity of the plasma jet.
CNC plasma cutting machines are commonly used in metal fabrication industries for cutting and shaping various metal parts, such as brackets, frames, and plates. They offer a fast and accurate cutting process, making them ideal for high-volume production runs.
CNC plasma cutting machines come in different sizes and configurations, depending on the specific application. Some models are portable and can be used on-site, while others are larger and more powerful for heavy-duty cutting tasks.
The CNC technology allows for precise and consistent cutting, as the computer program can control the cutting speed, intensity, and direction of the plasma jet. The machines can also be programmed to cut complex shapes and patterns, allowing for greater design flexibility.
Overall, CNC plasma cutting machines are popular among metal fabricators for their ability to cut through thick metals quickly and accurately, resulting in high-quality parts with minimal distortion. They offer a cost-effective and efficient cutting solution for a wide range of industries.
Product Details:
| Minimum Order Quantity | 01 Piece |
| Cutting Thickness | More Than 30 mm |
| Voltage | 220 V |
| Phase | I |
| Size | 3*1.5 meter |
| Controller Make | Fangling |
| THC Make | Fangling |
| Display Type | LED |
| Cutting Thickness for plasma | Depends on your power source |
| Cutting Thickness for Flame Cutting | 5-150 mm |
| Track Length | 3.5 meter |
| Arm Length | Aluminium |
| Cutting Option | Both Flame & Plasma |
Additional Information:
Product Details:
| Minimum Order Quantity | 01 Piece |
| Cutting Thickness | More Than 30 mm |
| Automation Grade | Fully-automatic |
| Function | Plasma & Oxyfuel |
| Cutting speed | 2000-6000mm/minute |
| Working voltage | AC 220/380+-10% 50HZ |
| Rated power | 300W |
| Accuracy | 0.2 mm |
| Cutting range | 1500X3000 MM |
Advantages:
1. Small landing occupation,Light weight, easy installation and operation.
2. Flame cutting and plasma cutting dual function.
3. High precision, fast speed, narrow kerf width, minimum heat affected zone, the cutting face smooth without burr.
Technical date sheet:
Additional Information:
Product Details:
| Minimum Order Quantity | 01 Piece |
| Cutting Thickness | More Than 30 mm |
| Automation Grade | Fully-automatic |
| Power | 300 w |
| Voltage | 240 VAC, 50/60 Hz |
| Phase | Single |
| Accuracy | 02-0.5 mm |
| Cutting speed | 2000-6000mm/minute |
| Cutting Material | Mild Steel, Stainless Steel, Aluminium, Copper, etc |
Advantages:
1. Small landing occupation,Light weight, easy installation and operation.
2. Flame cutting and plasma cutting dual function.
3. High precision, fast speed, narrow kerf width, minimum heat affected zone, the cutting face smooth without burr.
Technical date sheet:
Cutting range:1500*3000 mm(3000mm/6000mm)
Cutting thickness:Flame 5-100mm(plasma cutting thickness deponds on plasma Amp)
Cutting speed:2000-6000mm/minute
Accuracy: 0.2 mm
Working voltage: AC 220/380±10% 50HZ
Rated power: 300W
Additional Information:
Product Details:
| Minimum Order Quantity | 01 Piece |
| Cutting Thickness | More Than 30 mm |
| Automation Grade | Fully-automatic |
| Voltage | 415 V |
| Material | Mild Steel |
| Phase | Three |
| Cutting Speed | 20-4000mm/min |
| Running Speed | 0-12000 mm/min |
| Torch Lifting Stroke(mm) | 200 mm |
| CNC Controller | 10 Inches Fangling controller |
Additional Information:
Product Details:
| Minimum Order Quantity | 01 Piece |
| Plasma power | 100 A |
| Automation Grade | Manual |
| Phase | III |
| Voltage | 415 V |
| Technology | Dual IGBT Module Based Inverter Technology |
| Duty Cycle | 60% |
| Insulation | Class H |
| Degree of Protection | IP23S |
| Cutting Thickness | 30 mm |
| Max mild steel cut | 25 mm |
Additional Information:
Product Details:
| Minimum Order Quantity | 01 Piece |
| Type of Machine | Gas Plasma Cutting Machine |
| Max Cutting Thickness | Up To 10 mm |
| Automation Grade | Manual |
| Usage/Application | Plasma Cutting |
| Capacity | 40 Amps |
| Gas Supply | Compressed Air |
| Power Source | Plasma |
| Frequency | 50/60 Hz |
| Voltage | 240 V |
Additional Information:
Product Details:
| Minimum Order Quantity | 1000 Kg |
| Material Type | Steel |
| Service Location | Delhi, Faridabad, Gurugram, Palwal, Nuh, Rewari, Noida |
| Sheet Thickess | 0.5-150 mm |
| Cutting Type | Plasma Cutting |
| Shape | Any |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Cutter Size | 600 mm |
| Pipe Diameter | 500 mm |
| Pipe Material | Mild Steel |
| Operation Mode | Automatic |
| Machine Weight (kg) | 18.5 |
The Automatic Pipe Gas Cutting Machine is a high-precision, semi-automated flame cutting system designed specifically for accurate and efficient cutting of round pipes and cylindrical materials. Built for industrial applications such as fabrication, piping, boiler manufacturing, and heavy engineering, this machine ensures clean, consistent cuts with minimal manual intervention.
Equipped with adjustable torch movement and a self-aligning cutting system, it delivers smooth bevel cuts, straight cuts, and contour cutting on pipes of various diameters. The machine operates using oxy-fuel (gas + oxygen), making it a cost-effective solution for mild steel and carbon steel pipe cutting.
The rugged design, combined with easy operation and transportability, makes it suitable for both on-site and in-shop use. Whether you're preparing pipes for welding or cutting custom profiles, this machine enhances productivity, precision, and safety in your operation.
Additional Information:
Product Details:
| Minimum Order Quantity | 01 Piece |
| Machine Type | Portable |
| Cutter Size | 200 mm |
| Cutting Capacity | >110 mm |
| Pipe Material | Mild Steel |
| Power Source | Gas |
| Pipe Diameter | 200 mm |
| Operation Mode | Manual |
| Machine Weight (kg) | 12 |
| Suitable Material | Stainless Steel(SS), Mild Steel, Cast Iron, Alloy Steel |
| Usage Area | Foundry, Workshop, Fabrication Shop, Construction, Automobile |
Additional Information: